What are the causes and solutions for oil leakage in the distribution valve of Caterpillar 336D excavator?

1、 Reasons for oil leakage in the distribution valve of CAT 336D excavator

Distribution valve oil leakage refers to the leakage of engine oil from the distribution valve due to aging, wear, or damage of the sealing components during operation. The main reasons are:

1. The seal is aging, losing elasticity, and cannot effectively seal the distribution valve;

2. Poor friction or wear, resulting in poor sealing between the distribution valve and its sealing surface;

3. Insufficient air pressure or excessive lateral force increases the workload of the distribution valve, causing leakage.

2、 Solution to oil leakage in the distribution valve of Caterpillar 336D excavator

1. Replace the seal

Usually, simply replacing the seal of the distribution valve can solve the oil leakage problem. This solution is relatively simple and easy to implement, and is suitable for situations where the leakage of the distribution valve is relatively minor.

2. Install leak proof gaskets

For severely leaking distribution valves, in addition to replacing the seal, a layer of leak proof gasket can be pressed onto the seal to strengthen the seal and further prevent oil leakage. The selection of gaskets should be based on the specifications and models of the distribution valve, and installed correctly.

3. Replace the distribution valve

If the seal is severely worn and cannot function as a seal again, then the entire distribution valve needs to be replaced. At this point, simply remove the old distribution valve and reinstall the new one.

In summary, the issue of oil leakage in distribution valves should be promptly resolved. Firstly, we need to identify the cause of the oil leakage and then choose an appropriate solution. Don't procrastinate on the issue to avoid more serious consequences.

https://www.lh-usedexcavator.com/